Discussion on whether t weld joint is allowed on seal head
About whether to allow a t-shaped seam sealing head joining together to discuss a 1. Of course it is not allowed, the standard rules on the t-shaped weld is not permitted in 2. According to the regulations, is not, is not should not be banned cross stitch, but can have t weld, otherwise split head cannot be made 2 see you stainless steel head is in line with what standard, if it is according to GB150 and gauge design, advice is don't open seam t here's why:1 GB150, article 10.2.3 refers to the non-intersecting joint welds, and the intersecting ones are also in the form of flap and top plate.2. Article 69 of the tolerance code directly indicates that it is inappropriate to use the t-seam tolerance code.Not ban on standards, it should be said that is can have t weld head, head is also true that many tee splices in the production of the intersection of three according to the GB150 head is using disc and circular plate, the top round plate and a few boards together will not have a tee joint,. I've also seen patchwork, atmospheric pressure, sort of. Want to consider pressure, medium problems such as the four with suitable welding and inspection for a guarantee weld strength, is the use of the t mouth, is generally not inevitable t mouth must be used in this way not only fiveHead seam means that there is a t-word weld, unless only a weld, but the larger size of the head often not only spell a weld and t-word weld can have, such as a large diameter head, the center of the sun circle plus the surrounding pieces, so there is a t-word weld ahPrev News：>
Negative difference of minimum head thicknessNext News：>
How to feed the oval iron sealing head?| Updated:2019.12.17 Source: Clicks:
